Hvxrjkn Jumper Lead Heavy Duty Cables 500AMP Car Truck Booster Cables 2.2M Battery Start Jumper Emergency Battery Cable

<p><strong>Please kindly noted that this item is sold by jindouyunshanghai from Joybuy marketplace.</strong></p>Parts List:
2 x Fuse wires (one black and one red)
Highlight description:
1.It is an essential safety and security tool for every vehicle.
2.Made of quality material . durable and practical.
3.The soft pliable cable makes the leads very easy to handle.
4.Being 2.2 metres long from end to end gives them great flexibility
5.Great for SUVs . cars . vans . trucks . even large agricultural & commercial vehicles.

Specification:
Wire diameter material: copper clad aluminum
Length: 2.2 meters
Wire diameter: 8mm
Specification: 500A/2.2m
Applicable models: most car series
The connection procedure is as follows:
1.First . clamp the red wire of the starting cable on the positive pole of the red battery of the "rescued".
2.Then clamp the red wire at the other end to the positive pole of the red battery of the "rescue vehicle".
3.Clamp the black wire on the black negative battery of the "saved".
4.Then clamp the black wire on the black negative battery of the "rescue vehicle".
5.Start the engine of the "rescue vehicle" first . and then start the engine of the "rescue vehicle". If you find that the rescued vehicle still cannot be started . please check whether the metal contact part is in poor contact.
After starting the engine . you still need to remove the starting wire in order . otherwise it may cause a short circuit.
The procedure for removing the line is as follows:
1.First remove the black wire of the "distressed" vehicle.
2.Remove the black wire of the "rescue vehicle".
3.Then remove the red wire of the "rescue vehicle".
4.Finally . remove the red wire of the "rescued".

Instructions:
The battery wiring can be bought in the auto parts market. The battery wiring is generally black and red . which are mainly used to distinguish between the positive electrode and the negative electrode. There is no need to start the vehicle with electricity during the ride. You only need to connect the batteries of the two cars in parallel. The red wire is connected to the positive electrode of the battery of the two cars . and the black wire is connected to the negative electrode of the battery of the two cars . and then it can be started. The vehicle is out.

Notes:
1.Due to the difference between different monitors . the picture may not reflect the actual color of the item.
2.Please allow slight dimension difference due to different manual measurement. Thank you for your understanding.